•
 Specially formulated NR latex gloves, using uniquely designed chlorination process and synthetic polymer coating to minimize the risk of allergic reaction and improves donnability.
•
 Powder content complies with recommended regulatory requirement. Less than 2 mg per glove.
•
 Protein content contains 50 microgram or less of extractable protein per gram (using ASTM D5712 – 99 Modified Lwry Method).
•
 Chemical content – low level of chemical residue reduces the risk of Type IV irritation or allergic reaction.
•
 Unique formula design for excellent tactile sensitivity, fit and comfort.
•
 Even and stable glove coloration on prolong storage.
•

Quality Assurance:

–
 Sampling in accordance with ANSI-ASQC Z1.4.
–
 Exceed ASTM D3578-019 standard for pinhole defect (AQL 2.5) (In-house AQL for pinhole defect is 1.5).
–
 Satisfies requirements of ISO 10993 Biocompatibility Evaluation of Medical Devices, Part 10: Test for Irritation and Sensitization.
–
 Pass Viral Penetration Test – ASTM method F1671-97.
–
 Manufactured in accordance with MS ISO 9002 and EN 46002.

•
 Appearance: Beaded cuff for added strength.
•
 Textured palm and fingers provide better grip for wet and dry working conditions.
•
 Protein Content: Contains 50 microgram or less per gram.
•
 Powder Content: Less than 2 mg per glove.
•
 Barrier Defect: Tested according to ASTM 5151-99 watertight test method. Inspection level G1. AQL 1.5.
•
SIZE
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
Length (mm)
<––––––––––  min 240  –––––––––––>
Width (mm)
70
(+/– 10)
80
(+/– 10)
95
(+/– 10)
111
(+/– 10)
min 110
•
THICKNESS
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
Finger
<––––––––––  min 0.12 mm  –––––––––––>
Palm
<––––––––––  min 0.10 mm  –––––––––––>
Cuff
<–––––––––––  min 0.08  ––––––––––––>
(mm) Single Wall
•
TENSILE PROPERTIES
UNAGED
AGED
Tensile Strength (MPa)
min. 18.0
min. 14.0
Ultimate Elongation (%)
min. 650%
min. 500%

Chemical contact sensitizers not added:
•
 Accelerators

- Mercaptobenzothiazole (MBT)
- Thiuran (e.g. TMTD)
- Thiourea
•
 Antioxidants - Butylhydroxyamisole (BHA)
- 3,5 di-tertiary butyl 4-hydroxytoluene (BHT)
- 4,4-thiobis (6 tertiary butyl mena cresol) – Lowipox 44S36
•
 Antiozonants - Amine antiozonant derivatives IPPD, CPPD, DPPD
•
 Carbamate group of accelerators are added but is known to be non-detectable in the final glove using water extraction and thin layer chromatography (TLC) assay method for qualitative analysis.

back to top

© Spivey International Inc. 2004